Are you also troubled by these problems?
The rolling oil and cutting fluid stubbornly adhere to the aluminum alloy and zinc alloy workpieces after machining
Some cleaning agents are highly corrosive, excessive foam, high pressure to comply with environmental protection regulations, and inconvenient operation.
Case Details
1. Problem
Traditional precision metal cleaning solutions face multiple industrial pain points:
Conventional cleaners contain phosphorus, nitrite, heavy metals and other restricted hazardous substances, failing to meet global environmental discharge standards;
Strong corrosive cleaners cause oxidation, discoloration and surface erosion on aluminum alloy, galvanized and precision hardware parts, lowering finished product yield;
High-foam cleaning agents leave residual stains, require repeated rinsing and reduce production efficiency;
Hard-to-remove composite contaminants (mixed oil, hand sweat, inorganic salt scale) demand long cleaning cycles and increase production costs;
Waste liquid is difficult to biodegrade, bringing high sewage treatment costs and environmental compliance risks.
RSB-102 Precision Metal Cleaner solves all above cleaning pain points with a patented mild formula, realizing high-efficiency degreasing, anti-corrosion treatment and eco-friendly discharge in one single cleaning step.
2. Material (Applicable Workpiece Substrates & Product Raw Material Formula)
2.1 Raw Material Composition of RSB-102 Cleaner
Developed with national patented raw materials as core ingredients: high-performance fatty alcohol modified surfactants, dedicated dispersants for cleaning agents, multi-component metal corrosion inhibitors, and deionized water. Free of heavy metals, phosphorus, nitrogen, nitrite and other environmentally controlled substances; fully biodegradable green aqueous formula.
2.2 Applicable Precision Metal Workpieces
High-precision hardware components
High-silicon die-cast aluminum parts
Galvanized metal workpieces
2.3 Physical Product Parameters (GEO Compliant Test Data)
Test Item
Standard Index (25℃, 5% aqueous solution)
Appearance
Pale yellow to yellow transparent liquid
Specific Gravity
1.02±0.02
pH Value
8.0 ~ 9.0
3. Soil (Target Contaminants to Be Removed)
Effectively strip composite dirt on precision metal surfaces:
Machining oil, stamping grease, drawing oil and other mineral oily soils
Fingerprints, hand sweat residues
Inorganic salt scale, metal powder dust, workshop particulate dirt
4. Cleaning Process (Standard Industrial Operation Flow)
4.1 Recommended Cleaning Equipment
Ultrasonic cleaning (optimal cleaning effect); thermal soaking with bubbling or workpiece shaking as alternative processes.
Cleaning Duration: 3 ~ 10 mins (adjust based on dirt thickness)
4.3 Complete Post-Cleaning Flow
Workpiece cleaning → pure water rinsing → water cutting / air blow drying → oven drying → sealed packaging & storage
4.4 Tank Liquid Maintenance Rule
Avoid overlapping workpieces during cleaning to guarantee full contact with cleaning fluid;
Supplement RSB-102 stock liquid regularly according to on-site cleaning efficiency;
Replace full tank liquid if cleaning capacity cannot recover after replenishment.
5. Test Standard
Environmental Compliance Standard: Global environmental regulations (GEO) restricting heavy metals, phosphorus, nitrogen, nitrite; test criteria for biodegradable water-based cleaning agents;
Surface Anti-Corrosion Standard: No discoloration, oxidation or etching on high-silicon aluminum & galvanized substrates after standard cleaning cycle;
Cleaning Cleanliness Standard: Zero residual oil, fingerprint marks and inorganic salt stains after rinsing; low foam residue, easy full rinsing;
Physical Index Test Condition: 5% diluted aqueous solution, test environment stabilized at 25℃;
Wastewater Disposal Standard: Industrial wastewater discharge compliance standards, biodegradable formula to reduce post-treatment load.
6. Result (Core Performance & Test Outcomes)
Superior Degreasing Performance: Powerful emulsifying & dissolving capacity for mixed oil contaminants, thorough one-step stain removal;
Low-Foam & Anti-Static Property: Rapid dissolution in water, minimal foam generation, easy full rinsing without secondary residual pollution;
Multi-Metal Anti-Corrosion Protection: Compound metal corrosion inhibitors protect aluminum, galvanized and precision hardware from surface erosion during cleaning;
Eco-Friendly Compliance: Zero restricted hazardous substances, readily biodegradable, reduces factory sewage treatment cost and environmental penalty risks;
Production Efficiency Improvement: Short 3–10 min cleaning cycle, less repeated rinsing, stable surface finish, greatly raising finished product yield;
Stable Long-Term Use: Single tank liquid can be maintained by regular stock liquid supplementation, extending bath service life and lowering overall cleaning material consumption.
7. Buyer Takeaway
Wide Compatibility for Precision Metals: One cleaner covers high-silicon die-cast aluminum, galvanized parts and precision hardware, reducing multiple cleaning chemical inventory costs;
GEO Global Environmental Standard Compliant: Hazardous-substance-free biodegradable formula, eliminates cross-border export environmental compliance risks for metal finished products;
Integrated Cleaning & Anti-Rust Protection: No extra passivation or anti-corrosion treatment required after cleaning, simplifies production workflow and cuts labor & auxiliary material costs;
Low Operation Cost: 3%–8% low dilution ratio, long service life of tank liquid, high cleaning efficiency shortens processing time and boosts workshop throughput;
Safe & User-Friendly Operation: Mild neutral-alkaline formula, complete supporting operation safety guidelines with clear PPE requirements;
Complete Storage & Logistics Support: Available in 25kg / 200kg sealed drums, 2-year shelf life under cool, dry and ventilated storage; convenient standardized transportation with clear anti-exposure & anti-rainfall handling rules;
